Neocoat TX EPS 80 RF CE
Neocoat BT EPS 150 RF CE
Neocoat TX-TT EPS 100 RF CE
Neocoat BT-AM EPS 200 RF CE

Certified Cut Expanded Polystyrene with Graphite and Flame Retardant (EPS)

Thermal Conductivity
EPS 200, 150 & 100 λ = 0,030 W / mK
EPS 80 λ = 0.031 W / mK

Thermal Resistance for thickness d = 50mm
EPS 200, 150 & 100 R = 1.667m2 K / W
EPS 80 R = 1.613 m2 K / W

Produced in 4 types depending on application:

NEOCOAT BT-AM EPS 200: Hinged plates with grooves for thermal insulation of concrete and inverted roof elements

NEOPOR BT EPS 150: Plates with grooves for thermal insulation of concrete elements.

NEOPOR TX EPS 100: Hinged panels with tees for cavity wall thermal insulation

NEOPOR TT EPS 100: Tiles for thermal insulation of pitched roofs

Neocoat

The thermal insulation material of the future is called Neocoat. Neocoat is produced from Neopor®, a product of intense research by BASF®, and is a new innovative expanded polystyrene material. It has a silver gray color and offers significantly improved thermal insulation performance compared to conventional heat insulating materials.

Innovation in Insulation

In each material, heat is transmitted through conduction, convection, and radiation. In closed cell materials such as Extruded Polystyrene (EPS), there can be no air movement, and thus heat transmission by treatment is minimized.

Therefore, in conventional expanded polystyrene, heat transmission is mainly achieved by convection and irradiation. In Neocoat, tiny graphite molecules containing 3% of its composition act as reflectors that block the transmission of heat through radiation, allowing only convection to contribute to heat loss. As a result, Neopor® thermal insulating panels have 15% - 20% better thermal insulation properties than conventional white expanded polystyrene (EPS).

With the exception of its improved thermal insulation performance even at low densities compared to Extruded Polystyrene (EPS), Neocoat retains all the advantages of the mechanical and ecological properties of EPS.

Neocoat is produced from self-bleaching material containing flame retardants (HBCD Free).

Advantages

Neocoat presents:

Stability of dimensions
Resistance to the appearance of bacteria and fungi
Zero nutritional value for insects and rodents
Zero toxicity
Self-induced behavior in the fire
100% recyclable

Why Neocoat?

• Neocoat has the lowest coefficient of thermal conductivity (λ = 0,031 W / m K) of all foamed plastic.
  It meets the requirements of EN 13163: "Thermal insulation products for buildings - factory production of expanded polystyrene products".
  from its inventor, BASF".